|
Dow Corning XIA METER Silicone Oils , Emulsions & MasterBatches Silicone oils and silicone emulsions is mainly used as a mould release agent in foundries, also has wide application in the rubber and plastics industries. It is one of the component elements in making of polishes and cleansers for artificial leather fabrics and furniture polishes.
|
PRODUCTS
|
TYPE
|
CONTENT
|
REMARK
|
|
DC INDUSTRIAL
|
Poly Dimethyl siloxane fluid
|
100%
|
350 & 1000 cst
|
|
DC-290
|
Poly Alkyl alkaryl Emulsion
|
50%
|
Paintable release
|
|
IE 6601
|
PU Release emulsion
|
|
Water Based PU Release
|
|
DC 710/550
|
Phenyl Methyl Poly Siloxane
|
100%
|
Thermal Stable Fluid
|
|
DC-39
|
PDMS Emulsion
|
35%
|
Release Agent
|
|
HV-490
|
PDMS Emulsion
|
35%
|
Release Agent
|
|
SILANES PRODUCTS
|
TYPE
|
PURITY
|
REMARK
|
|
Z-6011
|
Amino functional alkoxysilane
|
98.50%
|
Coupling agent for Phenolic Resinsr
|
|
Z6040
|
glycidoxypropyl tri methoxy silane
|
98.50%
|
Coupling agent for Phenolic Resin
|
Silicone Fluid
Item Code: Dow-Corning-Q2
Dow-Corning-Q2 - 3387 Release Agent (Modified Silicone Fluid) : Silicone polymer
Features:
- No excessive cleaning required before finishing moulded parts
- Excellent mould coverage (good wetting and spreading)
- Heat stable
- No build-up on moulds
- No solvent : high flash point
Applications:
- Dow-Corning-Q2-3387 Release Agent has been specially formulated as a semi-permanent release agent in a wide range of applications, including:
- Polyurethane Release: particularly polyester type, polyurethane shoe soles.
- Micro-cellular automotive parts and furniture (integral skin).
- Automotive parts: bumpers, crash-pads, dashboards.
Typical Properties:
Specification writers: These values are not intended for use in preparing specifications. Please contact your local Dow Caning sales representative prior in writing specifications on this product-
|
CTM
|
Parameter
|
Unit
|
Value
|
|
862
|
Active material content
|
%w/w
|
100
|
|
176
|
Appearance (visual)
|
|
Clear colourless liquid
|
|
4
|
Viscosity at 25oC
|
mm²/s
|
140
|
|
6
|
Flash point - closed cup
|
oC
|
>250
|
|
|
Diluent
|
|
Aliphatic, aromatic, chlorinated hydrocarbons
|
CTM: Corporate Test Method, copies of CTMs are available on request.
How to Use?
DOW Corning Q2-3387 Release Agent (1 part w/w) is normally diluted with a solvent (10 parts w/w) before application by spraying or brushing on the mould.
Suitable solvents include most aliphatic, aromatic or chlorinated hydrocarbons.
Users are recommended to determine optimum concentration and application method on a small test sample before use in production.
Handling Precautions:
Product safety information required for safe use is not included.
|
